A 3 button switch for controlling the cruise functions is included. Fully watertight and durable. Mounts directly to standard 22mm handlebars with a fully opening bracket. This option provides 3 buttons.
Resume / Increase
Cancel
SET/ Decrease
Heated Grips, LED lights, and other upgrade compatibility
This kit is not compatibly with aftermarket brake flashers.
This kit is compatibly with aftermarket LED kits.
This kit is compatibly with stock and aftermarket heated grips.
Cruise Stop Conditions
We know its paramount on motorbikes to quickly kill the cruise control in as many situations as possible. Our module will disengage cruise control for any one of the following conditions
Engine RPM signal falls below 1000 or above 8000 RPM.
Front or Rear Brake Depressed
Throttle grip exceed cruise control by 5%
Any one of the required CANBUS packets are not updated within 100 milliseconds
Configuration
The module has a weather tight USB-C connector for changing various settings such as speed increment size, PID gain, and throttle limits.
Diagnostic Port
This kit uses the diagnostic port of your bike. If you need diagnostics you can simple unplug our module and the kit will still run in bypass mode.
Install Difficulty
To install this kit you must get access to the fuel tank area. About 1 -2 hours install time with proper tools. T-harness will override the throttle signals and diagnostic connector will collect important speed data. This kit also requires a single T-Tap connection into the brake wire.
